External Wall Insulation Bexley
This documented External Wall Insulation Bexley case study details the full EWI installation process on a semi-detached solid wall property, including EPS insulation, Kingspan Kooltherm K5 boards and a breathable silicone render finish. For full service information, specifications and quotation details, visit our External Wall Insulation in Bexley service page.
This completed External Wall Insulation Bexley DA5, DA6 case study documents our full installation process, from EPS insulation board fixing and Kingspan Kooltherm K5 detailing through to reinforced basecoat application and the final silicone render finish. For full service information and local coverage details, visit our External Wall Insulation in Bexley service page.
Homeowners across South East London and Kent have rated our work highly —
here are a few recent reviews
Thank you Ed.
kind regards FC
See this project on social media
Considering a similar External Wall Insulation Bexley upgrade for your property? You can find full details about our installation methods, insulation systems and silicone render finishes on our External Wall Insulation in Bexley service page.
Project Summary
This External Wall Insulation Bexley installation forms part of our documented EWI installation Bexley case study, completed on a pre-1930s solid wall property in DA5 and DA6. The project significantly improved thermal performance while upgrading the external appearance with a durable silicone render finish.
Project Overview
- Location: Bexley (DA5, DA6) with surrounding areas including Bexleyheath, Welling, Blackfen, Sidcup and parts of Crayford (DA1)
- Service Provided: External Wall Insulation (EWI)
- Insulation System: Expanded Polystyrene (EPS) chemically bonded and mechanically fixed, with Kingspan Kooltherm K5 detailing to the front elevation
- Property Type: Semi-detached residential house
- Construction Period: Pre-1930 solid wall construction
- Wall Build-Up: Traditional solid masonry walls (no cavity)
- Pre-Installation Condition: Weathered and deteriorating roughcast render with visible cracking and surface degradation
- Performance Issues Identified: Cold internal wall surfaces, localised damp staining, surface condensation and poor thermal retention
- Project Objective: Improve thermal performance, reduce condensation risk and provide a durable modern external finish
- Final Finish: 1.5mm grain EWI-075 silicone render in “Lead” colour
Technical Details: Solid Wall Insulation Bexley DA5, DA6
This section forms part of our EWI Pro system installation Bexley documentation, outlining system specification, insulation materials and detailing methods used on this solid wall retrofit project.
- External Wall Insulation System: EWI Pro approved system designed for solid wall retrofit applications
- Insulation Materials: 90mm Expanded Polystyrene (EPS) boards to side and rear elevations, with Kingspan Kooltherm K5 phenolic insulation applied to the front elevation
- Below DPC Treatment: 50mm XPS insulation installed beneath damp-proof course level to improve continuity of insulation
- Target Thermal Performance: Designed to significantly improve overall wall U-value and reduce heat loss through uninsulated masonry
- Fixing Method: Adhesively bonded and mechanically anchored to existing solid brickwork substrate
- Mechanical Fixings: Hammer-set fixings selected to suit insulation thickness and masonry condition
- Reinforcement Layer: Polymer-modified basecoat incorporating alkali-resistant fibreglass mesh to enhance system durability and crack resistance
- Primer Stage: Compatible primer applied to regulate suction and ensure consistent adhesion of final finish
- Finish Coat: 1.5mm grain EWI-075 silicone render system
- Colour Specification: “Lead” – selected to complement surrounding properties in the Bexley area
- Performance Characteristics: Vapour-permeable and water-repellent façade system designed for long-term exposure to UK climate conditions
- Detailing: Verge trims and EPDM roofline detailing installed to protect insulation edges and maintain long-term weather resistance
- Outcome: This External Wall Insulation Bexley installation enhanced thermal efficiency, improved surface temperatures internally and delivered a durable, contemporary external appearance
Project Outcomes: External Wall Insulation Bexley DA5, DA6 – Performance & Visual Upgrade
This completed solid wall insulation project Bexley demonstrates the performance, moisture control and aesthetic improvements achievable through a properly specified External Wall Insulation system.
- Enhanced Thermal Envelope: This External wall insulation Bexley project significantly reduced heat transfer through the original solid masonry walls, improving overall energy retention.
- Warmer Internal Surfaces: As part of this solid wall insulation project Bexley, internal wall surface temperatures were increased, reducing the cold feel typically associated with pre-1930s construction.
- Improved Heating Efficiency: The completed EWI installation Bexley reduced overall heat demand, allowing the property to maintain comfort levels more efficiently.
- Condensation Risk Reduction: By externally insulating the structure, surface temperatures remain above dew point more consistently, helping to control condensation.
- Contemporary Silicone Finish: The new 1.5mm grain silicone render finish in “Lead” provides a durable and modern façade appearance.
- System Durability: Reinforced basecoat and alkali-resistant mesh detailing help reduce cracking risk and support long-term performance.
- Weather Resistance: The vapour-permeable silicone topcoat protects the façade from driving rain while allowing moisture vapour to escape.
- Improved Fabric Protection: The EWI Pro system installation Bexley now shields the original brickwork from prolonged weather exposure and freeze-thaw damage.
- Low Maintenance Surface: The water-repellent silicone finish reduces dirt retention and long-term maintenance requirements.
- Energy Performance Contribution: This External Wall Insulation Bexley installation contributes toward improved overall building energy efficiency and EPC performance potential.
Related Rendering & Insulation Services in Bexley
| External Wall Insulation | External Rendering |
| Self-Cleaning Render | Silicone Render |
| Sand and Cement Render | Lime Render |
| Cork Render | Monocouche Render |
| Acrylic Render | Insulated Render |
| K Rend Rendering Services | Brick Slips |
| Ashlar Cut Effect Render | Colour Render |
Other Nearby External Wall Insulation Projects
Before Installation: This property formed the starting point of our External Wall Insulation Bexley case study, showing the original solid masonry construction prior to retrofit works. The uninsulated walls were contributing to heat loss, cold internal surfaces and increased heating demand — common performance issues in pre-1930s solid wall homes.
For full system specifications, installation methods and service coverage details, visit our External Wall Insulation in Bexley service page.
Rendering Progress: This stage of the External wall insulation project Bexley shows the side elevation completed with silicone render, while the front elevation has been primed and prepared for final topcoat application. Careful sequencing of insulation fixing, basecoat reinforcement and primer application ensures consistent system performance and long-term durability.
For full system specifications, insulation options and service coverage details, visit our External Wall Insulation in Bexley service page.
Installation Stage: This EWI installation Bexley phase shows 90mm EPS insulation boards fixed to the side and rear elevations, with Kingspan Kooltherm K5 phenolic boards installed to the front elevation. Correct board alignment, staggered joints and mechanical fixing patterns are essential for long-term structural stability and thermal performance.
For full system specifications, insulation options and service coverage details, visit our External Wall Insulation in Bexley service page.
Before Installation: This External wall insulation project Bexley began with weathered and deteriorating roughcast render to the original solid masonry walls. Visible cracking and surface degradation highlighted the need for a full solid wall insulation upgrade to improve both thermal performance and long-term façade protection.
For detailed system specifications, insulation thickness options and full service information, visit our External Wall Insulation in Bexley service page.
External Wall Insulation Bexley – Frequently Asked Questions
Is this a real External Wall Insulation Bexley case study?
Yes. This page documents a genuine EWI installation Bexley case study completed by our team, showing each stage of the external wall insulation process — from insulation board fixing and reinforcement detailing through to the finished silicone render system.
What type of property is shown in this Bexley EWI case study?
This project was completed on a semi-detached, pre-1930s solid wall home in the Bexley area. Properties of this type often benefit from an external thermal upgrade where the original masonry provides limited insulation performance.
What issues were identified before starting this installation?
Prior to works, the existing external finish showed signs of weathering and deterioration, including cracking and surface degradation. Uninsulated solid masonry can also contribute to colder internal wall surfaces and increased heating demand.
Why is external wall insulation effective for solid wall homes in Bexley?
External wall insulation forms a continuous thermal layer around the building, helping reduce heat loss and improve internal comfort without reducing internal floor space. This solid wall insulation project Bexley demonstrates how correctly detailed systems improve both energy performance and façade durability.
Which insulation materials were used on this project?
This EWI Pro system installation Bexley documentation details the use of 90mm EPS insulation boards to the side and rear elevations, with Kingspan Kooltherm K5 phenolic insulation installed to the front elevation where enhanced performance was required.
Was insulation installed below DPC level?
Yes. To improve thermal continuity at low level, 50mm XPS insulation was installed below the damp-proof course before applying the below-DPC finish.
How were the insulation boards fixed to the masonry?
Boards were installed using a dual-fix method: bonded with a compatible adhesive and mechanically anchored into the solid masonry substrate to ensure long-term stability.
Was reinforcement mesh used?
Yes. Alkali-resistant fibreglass reinforcement mesh was embedded within a polymer-modified basecoat layer to enhance impact resistance and help minimise cracking risk.
Are diagonal “stress patches” used at window corners?
Yes. Diagonal reinforcement mesh patches were installed at window and door corners to reduce the risk of stress-related cracking within the render system.
What render finish was chosen for this Bexley project?
The final finish was a 1.5mm grain EWI-075 silicone render system, selected for vapour permeability, water repellence and long-term durability. This forms part of the documented silicone render finish Bexley outcome shown in this case study.
What colour render was applied?
The silicone render finish was applied in the colour “Lead”, chosen to complement the property style and surrounding streetscape.
What finish was used below DPC level?
Below the damp-proof course, a black mosaic render finish was applied to provide a robust, durable and visually neat low-level detail.
How were roofline junctions protected?
Verge trims were installed along the roofline to protect the top edge of the insulation, with EPDM detailing used to maintain long-term weather resistance and watertightness at critical junctions.
Does the system help reduce condensation risk?
By improving external wall thermal performance, internal surface temperatures increase, helping reduce the conditions that lead to surface condensation in many solid wall properties.
How long does a typical EWI project in Bexley take?
Timeframes depend on access complexity and weather conditions, but many residential projects are completed within 2 to 4 weeks, allowing appropriate curing between basecoat, primer and topcoat stages.
Where can I find full service details for External Wall Insulation in Bexley?
For complete system specifications, insulation options and coverage information, visit our External Wall Insulation in Bexley service page.
Trusted External Wall Insulation Systems in the UK
EWI Pro – System used on this External Wall Insulation Bexley case study
EWI Pro supplied the certified external wall insulation system used on this External Wall Insulation Bexley project. This EWI Pro system installation formed part of our documented solid wall insulation upgrade, incorporating EPS insulation, Kingspan Kooltherm K5 detailing and a silicone render finish.
K Rend
K Rend is known for silicone and monocouche render finishes commonly specified alongside external wall insulation systems.
Weber
Weber provides external wall insulation systems and render finishes widely used across the UK residential sector.
Parex
Parex offers rendering and insulation system components suitable for both retrofit and new-build applications.
Wetherby Building Systems
Wetherby Building Systems supplies EWI solutions for solid wall and framed construction types.
Alsecco
Alsecco provides German-engineered external wall insulation systems designed to meet UK performance standards.
Baumit
Baumit supplies high-performance façade insulation systems with strong long-term weather resistance.
Johnstone’s Trade
Johnstone’s Trade manufactures Stormshield render and insulation systems commonly specified on UK housing.
Permarock
Permarock supplies certified external wall insulation systems used on residential and commercial retrofit projects.
WhatsApp us